How to Flash Firmware of Redmi 5A using SP Flash Tool

Xiaomi is China’s best Android smart device as well as other technology accessories manufacturer with best battery backup. Because they have the best battery backup and also can work for hrs without any hanging issue, individuals like Xiaomi smartphone exceptionally much. Just like Xiaomi Redmi 5A gadget which has ideal battery backup ever.

Battery features, sometimes Xiaomi smart device users face troubles with their tool’s software due to some trojan infections, irresponsive device practices as well as other little problems inside. To take care of these device glitches, you have to flash Stock ROM on your device using SmartPhone Flash Tool, if manufacturing facility reset not functioning.


  1. Create a backup of all data of Redmi 5A before following the flashing method.
  2. Check the battery percentage of the phone; it should be at least 70%.
  3. Disable any anti-virus software you have installed on your computer system.
  4. Xiaomi Redmi 5A’s USB cable offered.
  5. SP Flash Tool – Download
  6. Ensure that you have installed necessary USB VCOM drivers for Xiaomi Redmi 5A. If you have not installed, you can click on the download button – Download
  7. Xiaomi Redmi 5A Firmware file – Download

What is the SP Flash Tool?

SP Flash Tool is an application that can be mounted on your Laptop/PC and additionally aids you to flash stock ROM, unbrick bricked tools, format/erase, Customized ROM, and so on. This gadget is specially created for devices running MediaTek processors. We will certainly not recommend you try this on devices running besides MediaTek SoC. Smart Phone Flash Tool has a lot of features, some of which are mentioned below. If you want to know the detail features of the SP Flash Tool, you can read this article.

Features of SP Flash Tool

⦁    Fast, Simple and Easy to use.

⦁    Easily Flash Stock Firmware/Stock ROM.

⦁    Upgrade Stock Recovery To Custom Recovery Easily.

⦁    Don’t Need Any Extra Hardware.

⦁    It supports both the Operating System (Windows And Linux).

⦁    Very Low Resource Uses.

Warning: We are not responsible for any problem or damage occurred to your while following this tutorial. Do it on your own risk.

Steps to Flash Firmware of Xiaomi Redmi 5A using SP Flash Tool

Using SP Flash Tool, you can flash Xiaomi Redmi 5A Android tool (however make sure to examine if it is based on Mediatek IC). Flash any type of custom-made or stock ROM over Xiaomi Redmi 5A Android tool. Additionally, do see to it that you have installed Xiaomi Redmi 5A USB drivers effectively on your PC before flashing any firmware file.

Step 1: Unzip the SP Flash Tool and also download and install SP Flash Tool software from the pre-requisites section above.

Download and Install SP Flash Tool

Step 2: Download flash recovery image: FLashing is not easy; it takes time and patience. To flash Xiaomi Redmi 5A, make sure you have flash recovery image ready for your device model.

Download flash recovery image

Step 3: Load scatter file: Now double click on the “. exe” data to run. The software will ask you to fill the scatter file then. Click Scatter Loading (Load Scatter file of Xiaomi Redmi 5A).

Load scatter file

Step 4: Uncheck all packages: Now, you ought to uncheck all boxes from the SP flash tool.

Step 5: Load Recovery Image: Tick-box, Go to / click RECOVERY box from the list and load recovery image of your Xiaomi Redmi 5A device (load image from the separate window –>open)

Step 6: Recovery box is checked before you connect your Xiaomi Redmi 5A, in recovery image location (Uncheck all the remaining boxes).

Load Recovery Image and uncheck all the remaining boxes

Step 7: Currently, turn off your Xiaomi Redmi 5A and also link it to COMPUTER through a USB cable.

Step 8: After connecting your tool with PC, click download button ahead and click YES.

Step 9: Currently, you are practically done along with after sufficient blinking; it will be triggered with a green circle.

After Flashing Custom Recovery successfully, it will be triggered with a green circle.

Step 10: That’s it! You have successfully flashed firmware of your Xiaomi Redmi 5A device.

Note: Do not interrupt the flashing process. If you do so, your phone will go off and not come on at all. You might get the “USB device not recognized” error on further flashing attempts. You can read this article to fix the common error that occurs while flashing process using SP Flash Tool.


That’s it. If you followed every step correctly, you would be able to flash Firmware of Xiaomi Redmi 5A using SP Flash Tool. We truly wish that you located this overview sensible. Just in case, if you have stuck somewhere in between the process or have any concerns connected with this topic afterwards, do not be reluctant to leave them in the comment section below.

Leave a Comment